Capacity
1L volume so you can mountain bike for around 2 hours without needing to top up.
🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cookie Policy
I agree to the processing of my data in accordance with the terms set out in the Privacy Policy.Cart
Your cart is empty
This 1-litre water bladder keeps you hydrated during mountain bike rides lasting around 2 hours. It has a wide opening for quick cleaning and a 45°-angled mouthpiece.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
1L volume so you can mountain bike for around 2 hours without needing to top up.
Easy to fill and clean thanks to the sliding system.
The mouthpiece has an on/off switch so that it won't drip.
Accessible silicone mouthpiece that's comfortable to use when you're on the go.
This new water bladder has been lab tested for flexibility and robustness.
Description
This 1L water bladder is compatible with the following hydration backpacks: ST 500 mountain biking hydration backpack (ref. 8300156 ) EXPL 7L mountain biking hydration backpack (ref. 8644841, 8644842, 8644843, 8644844, 8644845) XC LIGHT mountain biking hydration backpack (ref. 8528735)
You can cut the water bladder's tube to the most convenient length for you! To do this, remove the bite valve, place the tube in hot water to soften it, cut it to the desired length and put the bite valve back on. The bite valve is lockable (rotates 180°) to prevent leaks when not in use. It won't drip, even when in the open position. To get a good flow when drinking, gently bite the valve and suck.
To avoid a plastic taste when drinking, we advise you to rinse the product 3 times before first use. We recommend cleaning it after every ride using the cleaning kit (product ref. 5935596). After cleaning, leave the hydration bladder upside down and open to dry thoroughly. If the plastic taste won't go away, place the dry hydration bladder in the freezer for one night.
Remember to take a look at our water bladders support page to make your water bladder last longer.
The materials used to make this water bladder are guaranteed to be free of BPA (bisphenol A) in accordance with current French regulations. It measures 31 x 16 cm, with a 100 cm tube. To make your water bladder last longer, we recommend not folding it, not filling it with hot liquids and not carrying it upside down or by its tube ;)
To improve water flow and stop the water sloshing around inside the bladder during your ride, we recommend releasing any air before you set off! Just turn the hydration bladder upside down once filled, direct the air bubbles towards the tube opening and suck them out. And hey presto, you can now drink quickly and quietly as you ride!
To check this water bladder's quality, we've tested it thoroughly in our in-house lab. Besides spotting no defects during our burst / high pressure tests, we noted an increase in puncture resistance of more than 74%.The water bladder is made in France, which means we can closely monitor production quality (for watertightness and sturdiness over time).
With its 1-litre capacity, your water bladder will last you around 2 hours of riding. It's quick to fill thanks to its wide opening. When closing it, make sure the slider clips into place to ensure that it won't leak.
Description
This 1L water bladder is compatible with the following hydration backpacks: ST 500 mountain biking hydration backpack (ref. 8300156 ) EXPL 7L mountain biking hydration backpack (ref. 8644841, 8644842, 8644843, 8644844, 8644845) XC LIGHT mountain biking hydration backpack (ref. 8528735)
You can cut the water bladder's tube to the most convenient length for you! To do this, remove the bite valve, place the tube in hot water to soften it, cut it to the desired length and put the bite valve back on. The bite valve is lockable (rotates 180°) to prevent leaks when not in use. It won't drip, even when in the open position. To get a good flow when drinking, gently bite the valve and suck.
To avoid a plastic taste when drinking, we advise you to rinse the product 3 times before first use. We recommend cleaning it after every ride using the cleaning kit (product ref. 5935596). After cleaning, leave the hydration bladder upside down and open to dry thoroughly. If the plastic taste won't go away, place the dry hydration bladder in the freezer for one night.
Remember to take a look at our water bladders support page to make your water bladder last longer.
The materials used to make this water bladder are guaranteed to be free of BPA (bisphenol A) in accordance with current French regulations. It measures 31 x 16 cm, with a 100 cm tube. To make your water bladder last longer, we recommend not folding it, not filling it with hot liquids and not carrying it upside down or by its tube ;)
To improve water flow and stop the water sloshing around inside the bladder during your ride, we recommend releasing any air before you set off! Just turn the hydration bladder upside down once filled, direct the air bubbles towards the tube opening and suck them out. And hey presto, you can now drink quickly and quietly as you ride!
To check this water bladder's quality, we've tested it thoroughly in our in-house lab. Besides spotting no defects during our burst / high pressure tests, we noted an increase in puncture resistance of more than 74%.The water bladder is made in France, which means we can closely monitor production quality (for watertightness and sturdiness over time).
With its 1-litre capacity, your water bladder will last you around 2 hours of riding. It's quick to fill thanks to its wide opening. When closing it, make sure the slider clips into place to ensure that it won't leak.
Composition
Composition
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.